(858) 350-4324 [email protected]

Mini +

Long Range M200 LiDAR System

MINI + 

Turnkey ready to fly drone lidar bundle

Mini Plus is compact lidar design specially configured for the M200 drone and longer range Quantergy M8 LiDAR head.

It has everything you need from terrain following lidar and drone flight software to post-flight processing tools to deliver high accuracy geo corrected point clouds into your workflow solution.

The mini plus bundle utilizes the Lite plus lidar payload, combining a high-performance INS / GNSS IMU position and attitude measurement unit with a laser scanner device to obtain three -dimensional point cloud information of structure such as high density and high precision ground surface and buildings. This is perfect for construction sites, surveyors, and gis professional who need a safe and compact solution to rapidly collect data and deliver.

With just a click of a button on your smartphone, you are up and scanning.

KEY FEATURES

  • Compact & Lightweight Design
  • Increased Safety – Obstacle Avoidance​
  • Increased Ranges over Velodyne–120m
  • Efficient Workflow​
  • 440,000 points/sec
  • Resolution +/- 20mm @ 50m​

SPECS

PLATFORM
DJI MATICE 200
  • Operating Range: 7km
  • Endurance: 38 min empty, 24 min with Mini
  • Obstacle Avoidance (Range and FOV)
  • Forward: < 30 m, 60°Horizontal/ 54°Vertical
  • Downward: <10m & <10m/s
  • Upward: 0-16.4 feet (0-5 m), FOV ±5°
SENSOR
QUANTERGY M8
  • Laser Properties: Class 1 (eye safe), 905 nm
  • Absolute Accuracy: 100 mm RMSE @ 50 m Range
  • Range Min/Max: 1.0 / 150 m
  • Scan Rate: 420,000 points
  • Field of View: 20° Vertical / 360° Horizontal
  • Multiple Echoes: 3
  • No. of Lasers: 8
POSITIONAL UNIT
INERTIAL MEASUREMENT EMBEDDED GPS SOLUTION
  • Integrated L1/L2 GNSS receiver and IMU
  • Constellation Support: GPS, GLONASS
  • Support alignment: Kinematic
  • Operation Modes: Precision Post Process, Post-processing standard
  • Accuracy Position: 1cm + 1ppm RMS horizontal

GEO-CORRECTING YOUR LIDAR DATA

Maximizes the performance of your GNSS/INS solution by ensuring you get the position, velocity and attitude accuracy your application requires. Benefits:
    • Streamlined Project Wizard for quick startup​
    • Efficient single step GNSS and Inertial Measurement Unit workflow​
    • Built-in processing profiles for airborne, ground, pedestrian and marine projects​
    • Support for multiple base stations​
    • Precise Point Positioning (PPP) processing​

READY TO TAKE FLIGHT? SPEAK TO ONE OF OUR SPECIALISTS.

On a Budget? Look into our financing options HERE.

TALK To One of Our Specialists

Pin It on Pinterest