FLIR Hadron

The FLIR® Hadron™ is SWaP+C (Size, Weight, and Power, + Cost) optimized RGB/Thermal module designed for simplicity and performance. This light weight, low power, compact form factor includes a 12MP RGB camera, Boson 320 thermal camera (with shutter), complete integration of IMU, can operate at up to 60 Hz, and is enclosed in an IP53 rated casing. Hadron’s design ensures maximum battery life and flight time, especially for small airframes. You can now offer your customers the power of thermal with the addition of this small module.


24 x 45 x 36 mm
Weight: 42.8g
Mechanical Interface: Screw mount to back plate
Operational & Storage Temperature:
-20°C to +60°C
Tested EMI Performance: FCC part 15 Class B
Environmental Sealing: IP53 (with the rear interfaces sealed)
IR Camera Sensor:
Boson 320×256 pixels, 12mm pitch, USB video and CCI
IR Camera Optics: EFL 6.3mm, 34° HFOV, F/# 1.0
IR Camera Video: Full resolution @ 60Hz or 30Hz
EO Camera Sensor: Sony IMX412, 4056×3040 pixels, 1.55mm pitch, 4-lane MIPI
EO Camera Video: Full resolution @ 60Hz See IMX412 datasheet for more options
IMU: ICM20602, I2C or SPI (selectable)
EO Camera Optics: Sunny SYD1201A, EFL 3.7mm, 80° HFOV, F/# 2.8
Electrical Interface:
5V supply voltage. Typical power dissipation < 1300mW, Max < 2820mW
Hadron connector: Hirose DF40C-50DP-0.4V(51)
Example of mating connector: DF40HC(2.5)-50DS-0.4V(51)


Need something custom?

Talk to one of our camera integration specialists about the right configuration for you. Click on the button below!