DRONE SPARE PARTS

DJI Matrice 300 Dual Gimbal Connector
Used to mount your loads to the bottom of Matrice 300 RTK

DJI Matrice 300 Upward Gimbal Connector
Used to mount your loads to the top of Matrice 300 RTK

DJI Matrice 300 – 2110 Propellers
Genuine propellers standards for Matrice 300 RTK drones

DJI Matrice 300 - OSDK Expansion Module
Compatible with the M300 RTK and Manifold 2

DJI Smart Controller Enterprise
o facilitate teamwork, it provides an advanced dual-control mode

4 smart battery cables incl zip ties
Cables that transfer the battery health status to the autopilot

WingtraOne Gen II Propeller (pair)
Standard set for flights at up to 2500m AMSL

WingtraOne Gen II Pair of Propeller Nuts and Washers
Two nuts and two washers required to hold the two propellers in place

WingtraOne Gen II Drivetrain Replacement Equipment
eft and right motor assembly, including all tools that are required for a replacement

WingtraOne Gen II Middle Stand
Back rudder for stability during flight, and surface for landing as well as standing upright

WingtraOne Gen II Side Stands (pair)
Supporting legs to ensure stability during take-off and landing

WingtraOne Gen II Nose Cover
Covers the flight battery compartment

Wingtra PPK dongle (grey and orange)
The orange dongle includes the software and the grey dongle includes the license file

Tablet SD card adapter (USB C)
It is compatible with older systems and a convenient

Samsung Tablet with WingtraPilot
Samsung Galaxy Tab Active 3 loaded with WingtraPilot.

Topcover for WingtraOne GEN II
Camera compartment cover for RGB payloads

WingtraOne Gen II Position Lights
The lights can be set to flash in one of three different strobe patterns and are charged with a micro USB

WingtraOne Gen II High Altitude Propeller (pair)
For flights above 2500m AMSL, these are required, plus they increase flight duration
DRONE SPARE PARTS

DJI Matrice 300 Dual Gimbal Connector
Used to mount your loads to the bottom of Matrice 300 RTK

DJI Matrice 300 Upward Gimbal Connector
Used to mount your loads to the top of Matrice 300 RTK

DJI Matrice 300 – 2110 Propellers
Genuine propellers standards for Matrice 300 RTK drones

DJI Matrice 300 - OSDK Expansion Module
Compatible with the M300 RTK and Manifold 2

DJI Smart Controller Enterprise
o facilitate teamwork, it provides an advanced dual-control mode

4 smart battery cables incl zip ties
Cables that transfer the battery health status to the autopilot

WingtraOne Gen II Propeller (pair)
Standard set for flights at up to 2500m AMSL

WingtraOne Gen II Pair of Propeller Nuts and Washers
Two nuts and two washers required to hold the two propellers in place

WingtraOne Gen II Drivetrain Replacement Equipment
eft and right motor assembly, including all tools that are required for a replacement

WingtraOne Gen II Middle Stand
Back rudder for stability during flight, and surface for landing as well as standing upright

WingtraOne Gen II Side Stands (pair)
Supporting legs to ensure stability during take-off and landing

WingtraOne Gen II Nose Cover
Covers the flight battery compartment

Wingtra PPK dongle (grey and orange)
The orange dongle includes the software and the grey dongle includes the license file

Tablet SD card adapter (USB C)
It is compatible with older systems and a convenient

Samsung Tablet with WingtraPilot
Samsung Galaxy Tab Active 3 loaded with WingtraPilot.

Topcover for WingtraOne GEN II
Camera compartment cover for RGB payloads

WingtraOne Gen II Position Lights
The lights can be set to flash in one of three different strobe patterns and are charged with a micro USB

WingtraOne Gen II High Altitude Propeller (pair)
For flights above 2500m AMSL, these are required, plus they increase flight duration

TALK TO AN EXPERT
Contact our team today to discuss our ready–to–ship and custom imaging and sensor solutions.

TALK TO AN EXPERT
Contact our team today to discuss our ready–to–ship and custom imaging and sensor solutions.

TALK TO AN EXPERT
Contact our team today to discuss our ready–to–ship and custom imaging and sensor solutions.